Brands > Other Partners > Canon > CXDI-40EG

Abex Canon page

  
Digital Radiography (DR) from CANON

CXDI-40EG

The CXDI-40EG Digital Radiography System has a large 17 inch x 17 inch imaging area that flexibly accommodates both large and small format anatomical views, in portrait or landscape orientation, without having to rotate the detector unit. Versatile and economical, the Canon CXDI-40EG Digital Radiography System's compact, lightweight design is ideal for upgrading existing radiography suites with digital imaging capabilities or can be retrofitted to an upright stand, universal stand, or imaging table.

Features

  • Immediate Results
    An on-screen preview image is available in just 3-5 seconds after exposure. The streamlined procedure eliminates film development, cassette replacement, and other process steps. A monitor (not included) can be added for viewing high-resolution images in the emergency department or radiography suite.

  • LANMIX MLT(S) Image Processing
    In addition to Canon's advanced noise reduction processing, MLT(S) image processing utilizes the multiple frequencies within the image data to emphasize edges and display appropriate dynamic range. Images of extremities, for example, show the subtle details of trabecular bone structure and soft tissue in high diagnostic accuracy. This process can be preset for repeatability as well as adjusted post-acquisition for variances in diagnostic requirements.

  • Canon's LANMIT® Technology
    Amorphous Silicon (a-Si) Flat Panel Sensor (LANMIT®) consists of a precision amorphous silicon metal-insulator semiconductor (MIS) sensor and Thin Film Transistor (TFT) array. LANMIT® flat panel sensors produce a highly stable output signal. The result is a family of reliable and durable sensors that provide the highest quality images without the time and costs involved with film or cassette handling. A 14-bit analog-to-digital conversion process converts the raw image to digital form producing a high-resolution, high-contrast 4,096 grayscale image.

  • Enhanced Productivity and Program Imaging Mode
    Program Imaging Mode for Canon CXDI Digital Radiography control software with DICOM Modality Worklist assists in optimizing workflow in the imaging suite. This high performance solution utilizes the Procedure Code ID from the RIS to configure the exam on the CXDI Digital Radiography system.

  • Seamless Network Integration
    Ethernet 10/100/1000 Base T connectivity with DICOM 3.0 compatibility enables seamless data transfer to any DICOM hard copy output device, PACS, or HIS/RIS for efficient printing, archiving, and remote viewing of images. The system complies with IHE (Integrating the Healthcare Enterprise) standards for interoperability to ensure easy, effective integration with the hospital network.

Specifications

Detector

 

Detector

LANMIT 6, Scintillator and Amorphous Silicon (a-Si)

 

Scintillator

Gadolinium Oxysulfide

 

Pixel Pitch

160 X 160 microns

 

Pixels

2,688 x 2,688 (7.2 million)

 

Imaging Area

17 inches x 17 inches (43 cm x 43 cm)

 

Image Acquisition and Processing

 

Image Processing

MLT(M) and MLT(S) are included

 

A/D

14-bit

 

Grayscale

12-bit (4,096 gradations)

 

Preview Image

3-5 seconds

 

Data Output and Network Connection

 

Network

Ethernet 10/100/1000 Base T, RJ45

 

Data Output

DICOM 3.0 compliant, Print Management Service Class (SCU), Storage Service Class (SCU), and others

 

Electrical and Environmental

 

Voltage

100V, 120V, 230/240V (50/60Hz)

 

Power Consumption

200VA maximum (Detector unit only)

 

Operating Environment

41-95°F (5-36°C), 30-75% RH (non-condensing)
(Detector unit only)

 

Physical Characteristics

 

Dimensions WxLxH

21.7 inches x 21.7 inches x 2.7 inches
(550 mm x 550 mm x 67.5 mm)
(Detector unit only)

 

Weight

Approximately 44 pounds (20 kg) without grid
   
 
     
Abex Medical System Sdn. Bhd. All Rights Reserved.